CCcam free

[Predator*]

I am going to introduce a new section to forum,because i am disgusted to see that a lot of members running CCcam servers are not prepared to give free clines to members who are new to CCcam protocal.When i say this i mean members who have limited skills in dreambox sharing etc.We must think when we have possibilities to share our bouquets,but we think of exchange only.Members join, place a thread in CCcam exchange get there desired clines for what ever bouquet then disapear of forum.I do this because of personal emails from members who i see on forum every day.so we have the forum we give you the means so dont grab like a bank manager share or give, what ever context you read this thread i only think of members that have requested help nothing else.To finish, this one member even ask if i knew pay server so he could get cline to join a server, obviously i said there are no pay servers on our forum sorry i cannot help you in that request.
PS: i not say much on forum but if there is a need to help members then i am straight there to help.Myself truthfully i want our forum to think of members and not of themselves we give you the possibilitieS to reach out to members all over the web so take a breath and get the oxygen to your brain and let it do its work.IN GIVING NOT TAKING..:mad:

[ahammersfan]

Without the help of Predator I would have struggled to get started with sharing and I thank him and others like him on this site.

I would ask everyone to please consider newcomers and offer them the tools and help they need to get started and in time they themselves will be in a position to help and offer shares too.

AHF

[Predator*]

Without the help of Predator I would have struggled to get started with sharing and I thank him and others like him on this site.

I would ask everyone to please consider newcomers and offer them the tools and help they need to get started and in time they themselves will be in a position to help and offer shares too.

AHFthanks fellow member ammersfan for reply, now i am in quandrum do i need to maybe get help and build my own linux free server and just issue free clines to fellow members.I need and want to share whatever i can offer.I need locals were i live possibillities are limited.I could perhaps offer these,sky uk,digi albanania,mct 21,sexview ,etc,art,cyfra,polsat.but i would need some help on others,so i think to myself build your server give and reap the rewards by helping honourable members.

[crnair]

As a comparatively new member I fully support Predator all the best and willing to help which ever way I can

[cogil]

Thanks predator for that spirit of helping others,
for those who are learning surely someone has to help them
with lines even if it is only for a week, for them to understand.
I am learning how to build a server, and also waiting for another DM,
sure will be able to help those receiving from my region even for a short period
just to learn, for i too learnt the same way plus if no one gives you a line, you
cannot learn or proceed.
Best of luck to those who can give others, you build the learning. So long as not used to exploit others.

[markus]

Good one Predator. Even i have felt that most people one give and ask exchanges and new people cannot get a account or cline from anyone. I try to help , new people , by telling them the basics of card sharing. Atleast, giving them an idea of what they need to know. There are many people who just register for one day, post saying they want exchange, get couple of exchange lines, and then they vanish.

[taree]

i am 100% agree to all of u
i am a beginer in cccam
but with little knowledge i have
i am here to help new members

[AlanDS]

I've learned a lot about CS after joining this forum. I'm also having a great ambition of creating Dish TV server. But due to my internet connection limitations, I can't do it for now. :(

About helping new members, I've been doing this since I joined here. Not only me, all our VIPs/Mods/Admins are providing help either via their replies to the threads or by answering PMs. Some of our Senior members are also doing this. I'm happy with what all going so far from our side.

It is disgusting to know that some members are just coming to exchange. It wouldn't going to help new members or forum. This is not the correct way.

I've also caught many new members who just come here to get C Lines. Some even come here to do business with their Payservers. I've some very bad experiences with new members. Some don't even bother to show any respect to the person who helped them. Some disappear from the forum after getting the help/clines. Some even misused our C lines. After seeing all these incidents, we have stopped giving accounts to new members. Now every new member has to prove his interest on our forum to get a line from our server.

Last but not least, I would like to thank mvdig,Daeng and all other generous people who provided their lines without expecting anything back from me. I would also like to thank Markus on this occasion.

Predator*, please go ahead on this matter.

[aatee]

admin,
great idea
for learner.

[mrsajid]

Very Good Idea I Also Introduce Free Gbox Server With Local And Wish Some One Introduce Cccam Free Server
Thanks

[crnair]

Alan What happent to thanks button ?? Is missing ??

[AlanDS]

Alan What happent to thanks button ?? Is missing ??
Its not available in some sections. In this section, you can post only if you have any suggestion/opinion. No THANKS POSTS.

[srinivasan]

I too welcome this idea of introducing a new session in the forum, because new members like me will get a chance to learn and do card sharing

[tejaaus]

Great Idea...Keep it up Predator.....Thanks

[tejaaus]

I hope this will help for begineers
CCcam and cardsharing

To configurate and connect the CCcam, you need to go to the ETC folder and edit the
CCcam.cfg file.The CCcam config file itself is a little help file. Indeed, you will find many text
lines starting with #. These lines provide help to set the CCcam, and there is no need to
delete them as they are ignored by CCcam. Therefore, they can also be used to add any note
or comment.
The configuration lines can be written in any order. There is no standard order to respect.
Indeed, when started, CCcam reads the first character of each line and executes the request.
Let’s look at each line syntax now.
F: Friends
F: user1 pass1 1
C: Connect
C: server.dyndns.org 12000 user1 pass1
The C line (where C stands for connect) enables the CCcam to connect to another server
The URL or IP after C: is necessary to identify the server in the sharing network. 12000 is the
port used by the server to communicate and user1 pass1 identify the user
Note: each user is accepted only once by the server
How to connect a client to a server:
The F line launches the server, whilst the C line launches the client, and this is all you need.
Should the client wish to share its subscription cards with the server, then you need to add a
C line at the server, and an F line at the client.
Log Diagnostic
Should you wish to check whether the connections are working properly, then use the CCcam
–dv Telnet command. This option will give you the possibility to check the log and make sure
all is ok.It may be useful for beginners to do it with Telnet, and, once experienced, it may also
be done using the the automatic script found in the blue panel.
This is what the dialogue between the 2 decoders should look like
1) 11:55:06.977 CCcam: found betacrypt caid: 0x1702 ecmpid: 0x100a id: 0x0
2) 11:55:06.978 CCcam: found betacrypt caid: 0x1722 ecmpid: 0x100a id: 0x0
3) 11:55:06.978 CCcam: found nagra caid: 0x1801 ecmpid: 0x1642 id: 0x0
4) 11:55:06.978 CCcam: cam[0] set PMT for sid=a
5) 11:55:06.979 CCcam: start EMM
6) 11:55:06.996 CCcam: cam[0] ecm even nok caid:0x1702 id:0x0 pid:0x100a Premiere Sat (19E)
tunneled Nagra (took 0.0010 seconds)
7) 11:55:07.061 CCcam: cam[0] ecm even nok caid:0x1722 id:0x0 pid:0x100a Premiere Kabel (19E)
tunneled Nagra (took 0.0003 seconds)
Lines 1) 2) and 3) display information about the service encryption
Pre***e is displayed with the 3 possidble CAId’s:
1702 tunnel Nagra = betacrypt for DVB-S
1722 tunnel Nagra = betacrypt for DVB-C
1801 plain Nagra (not used or only on s04 card) = unused.
The Pre**er provider is usually written with 6 digits.In this case, the service ID is 100a and
identifies Pre**er1.
Line 4) “Start EMM” marks the point where CCcam starts looking for keys
The 2 following lines list the local server replies.In this example, the replies are negative ecm
even nok caid:0x1722. This is normal as there are no cards in the receiver. The query lasted
0.0003s.
We then find the queries sent to the server:
8) 11:55:07.194 CCcam: remote ecm -> 192.168.1.3:12000 0x1702(0x000)
9) 11:55:07.331 CCcam: remote ecm <- 192.168.1.3:12000 ok (took 0.1364 seconds)
10) 11:55:07.333 CCcam: cam[0] ecm even ok caid:0x1702 id:0x0 pid:0x100a Pre***re Sat (19E)
tunneled Nagra (took 0.1383 seconds)>code<
ecm even ok caid:0x1702 means that this query has been successfully transmitted through
the LAN in 0.1383s
killall CCcam marks the end of the log

[user604]

thx Predator* (http://www.maldiviandigital.com/members/predator-.html) iam also new here and need alot of help in setting up this is like a project for me and now when it comes to C lines no one gives i myself dont know how to share but when i learn how to do that and i come across someone new with the same problem as me i will help good you post this topic up

they go on asking me for local and i dont even know what that means and when i ask them can you please explain what local means they dont reply back !!!

[gbourogi]

Good evening to all
i spend all of my day to read about cardsharing ,when i read this i feel very good because i think i found a place with the same philosophy like mine .TO SHARE THE GOOD THINGS...Therefore i help the people with the use of rapidshare ,downloading etc...
All these is new for me ,already had a dreambox 500 connecting and i want a cline and a little help to start and i am very happy after few days when i starting to give help to others .

kind regards from Greeceaaaa
Grigoris

[sharkeee]

Goodmorning!! I am also quite new. Need some help with the cline also. I have done everything else, correctly I hope. Is there anyone who can help?? please ???

[mpik1]

thanks very much!!!